top of page
Search

Section 184 Vehicle Crossovers: Licence, Planning Permission or Both?

Writer: Michael Okubajo
Michael Okubajo
13 hours ago
2 min read

A vehicle crossover, also called a dropped kerb, lets vehicles cross the footway or verge to reach a driveway or site. Under Section 184 of the Highways Act 1980, it is an offence to drive over a footway or verge except at a crossing approved by the highway authority. Every new crossover therefore needs highway approval. Some also need planning permission, and the two are separate decisions.

The Section 184 approval

The highway authority (usually the council, or TfL on red routes) decides whether the crossover is safe and acceptable on the highway. It looks at things such as:

  • visibility for drivers leaving the property and for pedestrians

  • distance from junctions, crossings, bus stops and other crossovers

  • street trees, lamp columns, utility covers and drainage

  • loss of on-street parking or controlled parking bays

  • whether the front garden is deep enough to park without overhanging the footway

The council either builds the crossover itself or licenses an approved contractor to do it. For more on what drivers need to see, read Visibility Splays Explained.

When planning permission is also needed

Planning permission is usually needed as well when:

  • the property fronts a classified road (an A, B or C road), or a trunk road

  • the property is a listed building, or in some areas a conservation area

  • the property is a flat or commercial premises, which do not have the same permitted development rights as houses

  • the driveway works themselves are not permitted development, such as a new hard surface that does not drain properly

On unclassified residential roads, a house usually only needs the Section 184 approval. Getting one approval does not guarantee the other, so check both before committing to the design.

Developer sites

For new developments, a new or widened access is normally shown on the planning drawings and approved with the planning application. Works on the highway may then be delivered through a Section 184 licence for a simple access, or a Section 278 agreement for anything larger.

How Capital Transport Planning can help

Capital Transport Planning prepares access drawings, visibility splays and swept path analysis to support crossover and access applications. We also advise on whether planning permission is needed. Call us on 020 8168 1911.

About the author: written by Michael Okubajo, Director of Capital Transport Planning, a Chartered Town Planner (MRTPI) and member of the Chartered Institution of Highways & Transportation (CIHT), with a postgraduate degree in Transport and City Planning from University College London (UCL).

 
 
 

Comments


Capital Transport Planning logo

​Capital Transport Planning is an independent consultancy delivering expert transport planning and infrastructure solutions across the UK.

  • Facebook – Capital Transport Planning
  • Youtube – Capital Transport Planning
  • Instagram – Capital Transport Planning
  • LinkedIn – Capital Transport Planning

Richmond Office,
Greater London

Address: Parkshot House, 5 Kew Road Richmond upon Thames, TW9 2PR

E: info@capitaltp.co.uk
P: +44 (0)208 1681 911

© 2026 by CTP. All rights reserved.

Website Made By DesignByComfy

bottom of page